Dishwashers run almost every day, so it’s no surprise the parts wear out. Over time they clean worse, stop draining, leak, or won’t start at all.
Whether your dishes aren’t coming out clean or there’s water sitting in the bottom, our technicians can get your dishwasher back in shape.
Types we work on
- Built-in
- Drawer
Common dishwasher problems
Tap a problem to see the usual causes. If none of these fix it, we will.
Won’t turn on
- The outlet has no power.
- A broken wire in the wiring harness.
- Defective control board or timer.
Dishes aren’t getting clean
- Clogged spray arm.
- Dirty filter or tub.
- No water supply.
- Faulty circulation pump.
- Defective turbidity sensor.
Not draining
- Defective drain pump.
- Something blocking the drain pump impeller.
- Clogged drain line.
- Control board or timer isn’t powering the pump.
Not filling with water
- Faulty water inlet valve.
- Pinched supply line.
- Damaged control board.
- Water supply turned off.
Dishes aren’t drying
- Faulty thermal fuse.
- Shorted heating element.
- Bad relay on the control board.
Leaking
- Worn door seal.
- Sump or pump seal failure.
- Hole in the drain line.
- Faulty float sensor.
Maintenance tips
- Clean the filter monthly
- Remove it and rinse with warm water, a soft brush and soap to protect the pumps.
- Wipe the inside of the tub
- A sponge and soap keep grease from building up.
- Check the spray arms
- Make sure food particles aren’t blocking the holes.
Parts we replace most
- Drain pump
- Circulation pump
- Heating element
- Thermal fuse
- Water valve
- Water level sensor
- Turbidity sensor
- Water diverter
- Spray arm
- Soap dispenser
- Control module
- Operating module
Brands we service
Thermador, Bosch, LG, Samsung, GE, Whirlpool, Viking, Amana, Asko, Frigidaire, Miele, Fisher & Paykel, Maytag, Kenmore, KitchenAid and more.